Aidite Zirkon Blok Pişim Programları

Aidite Zirkon Blok Pişim Programları

Aidite MP1500 tegra Speed (4 adımlı fırınlar)

Aidite -  3 üyeye kadar

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2
1200
43 0
3
1550
10 55
4 900 0 30 (Lift Açılış dk)

 

Aidite -  6 üye altı

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2 1050 50 0
3
1550
5 60
4 800 37 30 (Lift Açılış dk)

 

Aidite -  7 üye ve üzeri

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2 900 5 30
3
1550
3 120
4 300 8 30 (Lift Açılış dk)


Aidite MP1500 tegra Multistep (10 adımlı fırınlar)



Aidite 3D Pro Zir

This is a Multi-Layered product in 3D:

  • Translucent Gradient
  • Color Gradient
  • Strength Gradient

 

Below 3 units bridge (7h)

From 4 to 6 units bridge (10h)

 

 

Above 7 units bridge (15h)

 


Back to blog
  • Dişçilik için Zirkonya İşleme Süreci: Saflaştırılmış Sıvıdan Nihai Zirkon Blok

    Dental Zirconia Processing: From Purified Liqui...

    Introduction In the previous blog post, we explained the natural origin of zircon and how it is transformed into zirconium oxychloride, a purified liquid material. This liquid is the starting...

    Dental Zirconia Processing: From Purified Liqui...

    Introduction In the previous blog post, we explained the natural origin of zircon and how it is transformed into zirconium oxychloride, a purified liquid material. This liquid is the starting...

  • Diş Hekimliğinde Kullanılan Zirkonya’nın Kökeni ve Ham Madde Aşaması

    The Origin and Raw Material Stage of Zirconia f...

    (Reference image by Robert Matthew Lavinsky, Wikimedia Commons).Introduction Zirconia is widely used in modern dental restorations because of its strength, long-term durability, and natural appearance. But before it reaches dental laboratories,...

    The Origin and Raw Material Stage of Zirconia f...

    (Reference image by Robert Matthew Lavinsky, Wikimedia Commons).Introduction Zirconia is widely used in modern dental restorations because of its strength, long-term durability, and natural appearance. But before it reaches dental laboratories,...

  • Tegra MP1500 - MoSi2 ısıtma elemanı silica tabakası rejenerasyonu

    Regeneration of the silica layer of the MoSi2 h...

    SiO2 (silikon dioksit) yenilenmesi belirli bir sıcaklık aralığında etkili olur. Hem termodinamik açıdan, hem olumsuz etkilerden korunarak silisyum oksit tabakası yenilenmesi için en uygun sıcaklık 1300°C civarındadır.

    Regeneration of the silica layer of the MoSi2 h...

    SiO2 (silikon dioksit) yenilenmesi belirli bir sıcaklık aralığında etkili olur. Hem termodinamik açıdan, hem olumsuz etkilerden korunarak silisyum oksit tabakası yenilenmesi için en uygun sıcaklık 1300°C civarındadır.

1 of 3