MP100S vs MP200 Comparison Table
MP100S and MP200 are compatible with every type of porcelain powder and the quality of work is the same. The biggest difference is that the MP100S has two vacuum valves, which provides functions such as interval vacuum and holding a constant, adjustable vacuum level.
On the MP200, some parameters that are very rarely used and not needed in practice have been removed from the program by assigning fixed values. It is simpler to use.
Its simple structure makes it more economical.
| MP200 | MP100S | |
|---|---|---|
| Preheating Rate | Fixed (80C/min) | Adjustable () |
| Interval Vacuum | Single Valve (None) | Dual Valve (Interval/Continuous) |
| Rapid Cooling | None | Vacuum-assisted rapid cooling |
| Vacuum Level | None (Default 0 atm, 960 mmHg) | Adjustable |
| Cooling Rate | None | Yes |
| Waiting During Cooling | None | Yes |
| Parameters | MP 100S | MP 200 |
|---|---|---|
| Preheating Ramp Rate | 20-70 °C/min | Fixed 50°C/min |
| Preheat | 200-500°C/min | 200-500°C/min |
| Preheat Hold Time | 0-99 min | 0-99 min |
| Lift Closing Time | 0-99 min (10 steps) | 0-99 min (10 steps) |
| Drying Time | 0-99 min | 0-99 min |
| Target Temperature | Preheat -1100 °C | Preheat -1100 °C |
| Heating Rate | 20-130 °C/min | 20-130 °C/min |
| Vacuum Start Temperature | 0-1100 °C | 0-1100 °C |
| Vacuum End Temperature | 400-1100 °C | 400-1100 °C |
| Vacuum Hold Time | 0-99 min | 0-99 min |
| Cooling Temperature | 0-Target Temperature °C | None |
| Cooling Rate | 0-50 °C/min | Free Cooling |
| Cooling Hold | 0-99 min | None |
