Destek
Blog posts
View all-
Sintering Monolithic, Layered, Pre-Colored and ...
The most commonly used type of zirconia for dental CAD/CAM is yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) zirconia. Y-TZP is a very durable and strong material, making it ideal for many...
Sintering Monolithic, Layered, Pre-Colored and ...
The most commonly used type of zirconia for dental CAD/CAM is yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) zirconia. Y-TZP is a very durable and strong material, making it ideal for many...
-
How to sinter larger loads with up to 60 - 90 u...
Not getting the same results for a single unit versus a lot of units are due to the following factors: Heat Dissipation: When you sinter multiple teeth units in the same...
How to sinter larger loads with up to 60 - 90 u...
Not getting the same results for a single unit versus a lot of units are due to the following factors: Heat Dissipation: When you sinter multiple teeth units in the same...
-
Regeneration of the silica layer of the MoSi2 h...
The regeneration of SiO2 (silicon dioxide) is typically most effective within a specific temperature range. Thermodynamically, the best temperature range for SiO2 regeneration is generally between 800°C and 1100°C. Here's...
Regeneration of the silica layer of the MoSi2 h...
The regeneration of SiO2 (silicon dioxide) is typically most effective within a specific temperature range. Thermodynamically, the best temperature range for SiO2 regeneration is generally between 800°C and 1100°C. Here's...
