Sinterlenen Zirkon'da Beyaz Noktalar

White spots on zirconia

The source of white spots on work pieces is often quartz crystals that have been shed into the crucible, the pot itself, or the material in the pot, such as sand or beads.

You can inspect your resistors up close by taking a video of them with a phone. If you detect white scaling on the shiny protective silica surface, your problem is sourced here and it is recommended that you renew the resistors.

A more difficult source to detect can be devices that generate metal dust. For example, if the metal of the burs you are using is not suitable for zirconia and creates invisible metal dust, its effects will also be reflected on the work pieces.

The easiest way to identify the source is to apply our chamber cleaning program, separate the crucible, break off a piece of the zirconia discs, clean it, and sinter it without the crucible. If the problem persists, please refer to our articles to recreate the silica layer of the resistors. It is possible to extend the life of the resistors a little by regeneration, but it is also a sign that the time for replacement has come.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.

  • Tegra MP1500 - MoSi2 ısıtma elemanı silica tabakası rejenerasyonu

    Regeneration of the silica layer of the MoSi2 h...

    SiO2 (silikon dioksit) yenilenmesi belirli bir sıcaklık aralığında etkili olur. Termodinamik açıdan, SiO2 yenilenmesi için en uygun sıcaklık aralığı genellikle 800°C ile 1300°C arasındadır.

    Regeneration of the silica layer of the MoSi2 h...

    SiO2 (silikon dioksit) yenilenmesi belirli bir sıcaklık aralığında etkili olur. Termodinamik açıdan, SiO2 yenilenmesi için en uygun sıcaklık aralığı genellikle 800°C ile 1300°C arasındadır.

  • Porselen Fırın Bakımı: Güvenilir Performans İçin 7 Temel İpucu

    Porcelain Furnace Maintenance: 7 Essential Tips...

    Your porcelain furnace is one of the most critical tools in your workflow. Like any precision device, it performs best when it's treated well.

    Porcelain Furnace Maintenance: 7 Essential Tips...

    Your porcelain furnace is one of the most critical tools in your workflow. Like any precision device, it performs best when it's treated well.

  • Zirkonya Sinterleme Fırını Seçiminde Dikkat Edilmesi Gerekenler

    Zirkonya Sinterleme Fırını Seçiminde Dikkat Edi...

    Zirkonya sinterleme fırını satın alırken, uzun ömürlü ve yüksek performans sağlayacak bir fırın seçmek, kullanıcılar için büyük bir yatırımdır. İşte sinterleme fırını alırken göz önünde bulundurmanız gereken temel kriterler: 1....

    Zirkonya Sinterleme Fırını Seçiminde Dikkat Edi...

    Zirkonya sinterleme fırını satın alırken, uzun ömürlü ve yüksek performans sağlayacak bir fırın seçmek, kullanıcılar için büyük bir yatırımdır. İşte sinterleme fırını alırken göz önünde bulundurmanız gereken temel kriterler: 1....

1 of 3