Tegra Sinter Fırınları için Labcera Zirkon Pişim Programları

Tegra Sinter Fırınları için Labcera Zirkon Pişim Programları

Labcera MP1500 Tegra Speed/Multistep

Labcera -  1-2 üyeye kadar

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2
1500
25 120
3
0
0 0
4 200 25 30 (Lift Açılış dk)

 

Labcera -  3-5 üyeye kadar

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2
1500
12 120
3
0
0 0
4 200 12 30 (Lift Açılış dk)

 

Labcera -  5-16 üyeye kadar

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2
1500
8 120
3
0
0 0
4 200 8 30 (Lift Açılış dk)

 

Labcera -  Monolitik Uygulama

Adım/Step
Sıcaklık(C) Hız(C/dk) Bekleme(dk)
1
300
10 0
2
1500
5 120
3
0
0 0
4 200 8 30 (Lift Açılış dk)

 

 

Back to blog
  • Monolitik, Katmanlı, Ön Renkli ve Geçirgen Zirkon Blokları Sinterleme

    Sintering Monolithic, Layered, Pre-Colored and ...

    The most commonly used type of zirconia for dental CAD/CAM is yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) zirconia. Y-TZP is a very durable and strong material, making it ideal for many...

    Sintering Monolithic, Layered, Pre-Colored and ...

    The most commonly used type of zirconia for dental CAD/CAM is yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) zirconia. Y-TZP is a very durable and strong material, making it ideal for many...

  • Katlı potalarla 60-90 üniteye kadar sinterleme teknikleri

    How to sinter larger loads with up to 60 - 90 u...

    Not getting the same results for a single unit versus a lot of units are due to the following factors: Heat Dissipation: When you sinter multiple teeth units in the same...

    How to sinter larger loads with up to 60 - 90 u...

    Not getting the same results for a single unit versus a lot of units are due to the following factors: Heat Dissipation: When you sinter multiple teeth units in the same...

  • tegra MP1500 - MoSi2 ısıtma elemanı silica tabakası rejenerasyonu

    Regeneration of the silica layer of the MoSi2 h...

    The regeneration of SiO2 (silicon dioxide) is typically most effective within a specific temperature range. Thermodynamically, the best temperature range for SiO2 regeneration is generally between 800°C and 1100°C. Here's...

    Regeneration of the silica layer of the MoSi2 h...

    The regeneration of SiO2 (silicon dioxide) is typically most effective within a specific temperature range. Thermodynamically, the best temperature range for SiO2 regeneration is generally between 800°C and 1100°C. Here's...

1 of 3